Demo Mode; Before First Use - Electrolux GA55SLI220 Notice D'utilisation

64 www.electrolux.com
5.2 Multitab
Activate or deactivate the multitab
option before the start of a pro-
gramme. You cannot activate or
deactivate this option while a pro-
gramme operates.
Activate this option only when you use the
combi detergent tablets.
This option deactivates the flow of rinse
aid and salt. The related indicators are off.
The programme duration can increase.
1. Open the menu option.
2. Go to Multitab and activate the op-
tion.
3. Press OK to confirm.
4. Press the display touchpad to close
the menu option.
The option stays on until you deactivate it.
Go to menu option and deactivate the
multitab option.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Deactivate the multitab option.

6. BEFORE FIRST USE

1. Activate the appliance.
2. The display shows the default lan-
guage: Language English.
• Press OK to confirm.
• Press one of the menu touchpads
to set a different language and then
press OK to confirm.
3. The display shows the time message.
Press one of the menu touchpads to
set the time.
4. Press OK to confirm. The display
shows the ' Programs ' area.
5. Make sure that the set level of the wa-
ter softener agrees with the water
All manuals and user guides at all-guides.com
2. Set the water softener to the highest
level.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the water
hardness in your area.
6. Adjust the released quantity of rinse
aid.

5.3 Demo mode

With this option you can simulate a pro-
gramme.
Factory setting: off.
1. Open the menu option.
2. Go to Demo mode and activate the
option. The option is active when you
see DEMO in upper left corner of the
display.
Deactivate the Demo mode if you
want to use the appliance.
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
6. Fill the salt container.
7. Fill the rinse aid dispenser.
8. Open the water tap.
9. Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent and
do not load the baskets.
If you use the combi detergent
tablets, activate the multitab op-
tion.