Rc Functions Mode 1 - XciteRC Flybar 190E Single Blade Mode D'emploi

• If the fl ight battery runs low, the motor speed is reduced and the helicopter sinks automatically. Find a
suitable place to land safely. Charge the fl ight battery again.
EN

RC functions MODE 1

For mode switching press direction trim button to the right while switching transmitter on.
Up - down
Move the throttle lever forward, the motor revs
up and the helicopter rises. Move the throttle le-
ver backwards to sink again.
Forward - reverse
Move the direction lever towards you, the heli-
copter will move forward. Move the throttle stick
back to reverse.
Left - Right
Move the direction lever to the left, the helicop-
ter turns to the left. Move it to the right to turn
the helicopter to the right.
20
RC functions MODE 1
Trim up - down
If the rotor turns, even when the throttle lever is
fully down, keep pressing the trim button down
until it stops. If it will not turn, even when you give
gas, trim upwards.
Trim forward - reverse
When hoovering, the helicopter must stand in
place. If it moves forward, move the trim button
down until it stops, or vice versa.
Trim left - right
When hoovering, the helicopter must stand in
place. If it moves to the right, move the trim but-
ton to the left until it stops, or vice versa.
XciteRC Flybar 190E Easy