Shaving Using The Mains Adapter; Trimmer/Long Hair Trimmer - SilverCrest SRR 3.7 C4 Mode D'emploi

Shaving using the mains adapter

CAUTION! MATERIAL DAMAGE!
► This appliance is not suitable for wet shaving!
Should you wish to use the shaver without first charging the battery,
you can do so by using energy directly from the mains adapter
1) Plug the connector
Pay heed to the correct polarity: The guide pillar in the charging
socket must grip the guide rail on the connector plug
does not, the connector plug
2) Insert the plug into a mains power socket.
The shaver can then be used.

Trimmer/long hair trimmer

To shape your beard, form sideburns or shave eyebrows, use the
trimmer unit
1) Pull the cutting unit
2) Fit the trimmer unit
3) Attach the trimmer unit
on the trimmer unit
SRR 3.7 C4
All manuals and user guides at all-guides.com
into the charging socket
.
, if attached, off the handset.
onto the drive shaft
in such a way that both guide pillars
grip the guide rails on the drive shaft
cannot be inserted.
(see figure).
:
on the shaver.
. If it
.
57
GB