Customizing The Power Button; Programming A Non-Bose Remote Control - Bose SOUNDTOUCH 300 Notice D'utilisation

S E T T I N G U P T H E U N I V E R S A L R E M O T E C O N T R O L

Customizing the power button

You can customize the power button
soundbar, TV and another source simultaneously.
1. Program your remote control to control your TV and source (see page 24).
2. Press and hold
until both buttons flash three times.
Resyncing your source and TV
After customizing the power button, your source and TV may become out of sync and
not power on/off simultaneously. Use the following steps to resync the system.
1. Press the source button for the source that is out of sync.
2. Press to power on/off the source.
3. Press .
Your sources power on/off simultaneously.

Programming a non-Bose remote control

You can program a non-Bose remote control, such as your cable/satellite box remote,
to control the soundbar. Refer to your non-Bose remote control owner's guide or
cable/ satellite website for instructions.
Once programmed, the non-Bose remote controls basic functions such as power on/off
and volume.
Note: The non-Bose remote must be able to send IR (infrared) signals to control
the soundbar.
and the appropriate source button simultaneously for 10 seconds
on your remote control to power on/off your
E N G L I S H - 2 5