Power; Connect The Soundbar To Power; Network Standby - Bose SMART SOUNDBAR 700 Mode D'emploi

CONNECT THE SOUNDBAR TO POWER

1. Connect the power cord to the b connector on the back of the soundbar.
2. Plug the other end of the power cord into an AC (mains) power outlet.
The soundbar powers on and the light bar glows solid amber.

NETWORK STANDBY

The soundbar transitions to network standby when audio has stopped and you have
not pressed any buttons for 20 minutes. To wake the soundbar from network standby:
• Play or resume audio using your mobile device or using the Bose Music app.
• Talk to Amazon Alexa or your Google Assistant.
• On the remote, press the Power button I, a source button (see page 24), or
Bose Music button m then a preset button (see page 25).
NOTES:
• To access your voice assistant in network standby, make sure the soundbar is set up
using the Bose Music app and the microphone is on (see page 28).
• You can disable the standby timer using the Bose Music app.
P OWE R
|
1 7 E N G