Festo MPA Mode D'emploi page 13

Recommendation:
Use the following 25−pin sub−D plugs with cables from the
Festo range for connecting the MPA valve terminal with
multipin connection.
Type VMPA−KMS1−8−..: Terminal with 4 valve locations
Type VMPA−KMS1−24−..: Terminal with 8...24 valve
Pin 1 corresponds to address 0, ... Pin 24 corresponds to address 23
2.2 Pin assignment of the sub−D multipin plug
Notes on the following table:
Valve locations for controlling 2 coils are marked
with a grey background
Add. = Address
Core colour applies to cable type: VMPA−KMS1−...
Designation of the colour codes as per DIN/IEC 757
Festo MPA−... 0305a English
locations
13
25
1
14
13