- OUTILS NÉCESSAIRES - HERRAMIENTAS NECESARIAS NECESSARY TOOLS 27mm 17mm silicon 2 mm 10mm 12mm - DONNÉES TECHNIQUES - DATOS TÉCNICOS TECHINCAL DETAILS Minimum pressure Pression minimum Pression mínima 1 BAR Minimum pressure Pression maximum Pression máxima 10 BAR Reccomended working pressure Pression optimale de service Pression de trab.
Page 3
- DONNÉES TECHNIQUES - DATOS TÉCNICOS TECHINCAL DETAILS If water pressure is above 5 bar, it is advisable to install a flow restrictor upstream of the water supply to avoid vibrations and regulate temperature. Si la pression de l’ e au est supérieure à 5 bar, il est recommandé d’installer un réducteur de pression en amont de l’alimentation afin d’...
- PRÉ-INSTALLATION - PREINSTALCIÓN PRE-INSTALLATION J019BU 3-7/8" 3-7/8" 3-7/8" 3-7/8" 7/8" Ø 2-1/2" Ø 2-1/2" Ø 2-1/2" G1/2 " Ø 2-1/2" 2-7/8" 7-7/8" 9-3/8" 25" 3-7/8" 3-7/8" 3-7/8" 3-7/8" G 1/2" G 1/2" 1/2" NPT 1/2" NPT These mixers can be used with high-pressure hot water accumulators or with instant water heaters.
Page 19
- UTILISATION - USO On first use or following prolonged periods of inactivity, do not use the first half-litre of drinking water dispensed. Shut off the plumbing system in the event of a long absence. Check the water-tightness regularly. Lors de la première utilisation ou après une longue période de non utilisation, ne pas consommer le premier demi-litre d’...
CARTRIDGE REPLACEMENT - REPLACEMENT DE LA CARTOUCHE SOSTITUTION DEL CARTUCHO 2 mm...
Page 21
CARTRIDGE REPLACEMENT - REPLACEMENT DE LA CARTOUCHE SOSTITUTION DEL CARTUCHO 27 mm • Replace following the instructions in reverse order (4-3-2-1). • Re-installer au contraire du procédé (4-3-2-1). • Colocar según el procedimiento inverso (4-3-2-1).