Olsberg 14/534 Notice D'utilisation page 26

• Connect the heating elements to the charge control
according to circuit diagram (page 28
Be careful that the capillary tubes do not touch
live parts.
• The heater is then re-assembled as described in
Part 1-7 on page 23, but in reverse order.
Disassembly of fan drawer
For disassembly of drawer (e.g. for maintenance
works) unscrew the air outlet grill, release the inner
screws (D) on the right and left side, turn them off
about 15mm and press them back.
Remove right side panel.
Pull out the fan connection cable and the drawer.
When reassembling the drawer pull back the connec-
tion cable into the lateral control panel room and
tighten the two screws (D) firmly. See that the drawer
does not surpass the bottom plate of the heater at the
front.
Refasten right side panel and air outlet grill.
26
All manuals and user guides at all-guides.com
)
.
D
Fig.8 Disassembly of fan drawer