Functions - IKEA SMAKLIG Manuel

ENGLISH

Functions

BRIDGE MODE
+
By selecting the "Bridge + Mode" button, you can combine two
cooking zones and use them at the same power by covering the
entire surface with a large pot or partially with a round/oval pot.
The function always remains on and, when using only one pot,
can be moved over the entire area. In this case, both left-hand
scroll keypads can be used indifferently. Ideal for cooking with
oval or rectangular pots or with pan supports.
To activate/deactivate the bridge + zone press the bridge
AUTOMATIC FUNCTIONS
Place the pot in position and select the cooking zone.
Press the automatic functions button. "
display.
The indicator for the special feature available for the cooking
zone will light up.
Press "ok" button to confirm, otherwise the special function
indicator will start blinking, waiting for the ok. The power level
during the special function is preset and cannot be modified.
To deactivate the automatic functions, press the "0" button.
• Melting
This function allows you to bring food to the ideal
temperature for melting and to maintain the condition of the
food without risk of burning. This method is ideal, as it does
not damage delicate foods such as chocolate, and prevents
them from sticking to the pot.
Troubleshooting
• Check that the electricity supply has not been shut off.
• If you are unable to turn the hob off after using it, disconnect
it from the power supply.
• If alphanumeric codes appear on the display when the hob is
switched on, consult the following table for instructions.
Display code Description
No Code You cannot activate or operate
the hob.
• No Code The display does not react to the
•
touch.
•
F0E1 Cookware is detected but it is
not compatible with requested
operation.
F0E7 Wrong power cord connection
The control panel switches off
F0EA
because of excessively high
temperatures.
F0E2, F0E4, F0E6, Disconnect the hob from the power supply.
F0E8, F0EC, F1E1, F6E1, Wait a few seconds then reconnect the hob to the power supply.
F7E5, F7E6, F2E1 If the problem persists, call the service centre and specify the error code that appears on the display.
The hob does not allow a special
e.g.
function to be activated.
The hob automatically sets a
e.g.
minimum power level to ensure
[Power level lower
that the cooking zone can be
than level requested]
used.
+ button
A " will appear on the
Possible causes
There is residual water or
stains on the control panel.
Part of the display is covered
or the pots are placed too near
to the display.
The cookware is not well
positioned on the cooking
zone, or it is not compatible
with one or more cooking
zones.
The power supply connection
is not exactly as indicated in
"ELECTRICAL CONNECTION"
paragraph.
The internal temperature of
electronic parts is too high.
The power regulator limits the
power levels in accordance
with the maximum value set
for the hob.
The power regulator limits the
power levels in accordance
with the maximum value set
for the hob.
To download the full version visit www.ikea.com
• Keep Warm
This feature allows you to keep your food at an ideal
temperature, usually after cooking is complete, or when
reducing liquids very slowly. Ideal for serving foods at the
perfect temperature.
• Simmering
This function is ideal for maintaining a simmering
temperature, allowing you to cook food for long periods
with no risk of burning. Ideal for long-cooking recipes (rice,
sauces, roasts) with liquid sauces.
• Boiling
This function allows you to bring water to the boil and keep it
boiling, with lower energy consumption.
About 2 litres of water (preferably at room temperature)
should be placed in the pan, and left uncovered. In all cases,
users are advised to monitor the boiling water closely, and
check the amount of water remaining regularly.
NOTE: in case of activation of the power management at 2.5kW,
boiling function will not be available.
Please note: The presence of water, liquid spilled from pots or
any objects resting on any of the hob buttons can accidentally
activate or deactivate the control panel lock function.
Solution
Clean and dry the control panel.
Remove the objects. Move the
pots away from the display. If the
problem persists wait 10 seconds.
Press On/Off button twice to
remove the F0E1 code and restore
the functionality of the cooking
zone. Then, try to use the cookware
with a different cooking zone, or use
different cookware.
Adjust the power supply connection
according to "ELECTRICAL
CONNECTION" paragraph.
Wait for the hob to cool down
before using it again.
See paragraph "Power
management".
See paragraph "Power
management".
7