Check Operation - Kohler K-5401-PA-0 Guide D'installation

8. Check Operation

CAUTION: Risk of personal injury. Verify that the plug (if plug-in connection is used) and
receptacle are dry. If any moisture is present, allow the area to dry before plugging the unit in.
Plug the power cord into the GFCI* receptacle.
Press the flush button on the side control panel to flush the toilet. Check for proper operation.
Refer to the troubleshooting table in the Homeowners Guide if the toilet does not function properly.
*Outside North America, this device may be known as a Residual Current Device (RCD).
Kohler Co. 11 1357210-2-C