Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V 2.5
ELECTRIC POWER TOOL PRECAUTIONS
WARNING! Immediately switch off the power tool if any of the following occurs:
•
Malfunction of the plug, receptacle or damage to the power supply cord.
•
The switch or trigger is broken.
•
The user sees or smells smoke.
•
The user smells the odor of scorched insulation.
•
A safety guard moves stiffly and/or doesn't return to the safe position.
•
The grinding disc moves in an unsafe way.
1.
Ensure power supply matches the voltage of the tool's motor (see Specifications).
2.
Make sure the power switch is in the OFF position before connecting the tool to
the power supply.
3.
Do not place the tool down until the grinding disc has stopped moving. The grinding disc may
catch the surface of work material and wrench itself free, causing injury to the user or others in
the work area.
4.
Never use a tool with a cracked or worn grinding disc. Change the grinding disc before using.
5.
Do not start the tool when the grinding disc is touching the work piece.
6.
Always use both hands when operating the tool, unless the tool is designed for single hand use.
7.
Hold tool by insulated gripping surfaces when performing an operation where it may contact
hidden wiring or its own cord. Contact with a live wire will electrify exposed metal parts and
shock the operator.
8.
Before using the tool on a work piece, test the tool by running it at the highest no-load speed
for at least 30 seconds in a safe position. Stop immediately if there is any abnormal vibration or
wobbling that could indicate poor installation of the grinding disc. Check the tool to determine
the cause.
9.
Do not allow the tool's motor to overload and/or overheat. Take frequent work breaks to
prevent this.
10. When the tool is in operation, keep hands away from the grinding disc and the area it is
being applied to.
11. Do not use the tool on any material containing asbestos.
12. Do not touch the grinding disc or the surface that has been cut with this tool immediately after
use. The surface will be hot and may cause an injury.
13. Do not allow persons who are not familiar with the tool or have not read these instructions to
use the tool.
8
All manuals and user guides at all-guides.com
5 in. Angle Grinder
For technical questions call: 1-800-665-8685
8336174
Publicité
Table des Matières
