Parts Identification - Power Fist 8336174 Manuel D'utilisateur

8336174
TOOL USE AND CARE
1. Use the correct tool for the job. Do not force a tool or attachment to do the work of a larger
industrial tool. Maximize tool performance and safety by using the tool for its intended task.
2. This tool was designed for a specific function. Do not modify or alter this tool or use it for an
unintended purpose.
3. Securely hold this tool using both hands, unless it is designed for single hand use. Using a tool
with only one hand can result in loss of control.
4. Maintain tools with care (see Maintenance).
5. Remove adjusting keys and wrenches from the tool before operation or connecting it to a power
source. A wrench or key that is left attached to a rotating part of the tool increases the risk of
personal injury.
6. Avoid unintentional starts. Be sure that the ignition switch is in the neutral or OFF position when
not in use or before connecting it to any power source.
7. Do not carry the tool with fingers near or on the trigger/switch.
UNPACKING
1. Carefully remove the parts and accessories from the box. Retain packaging material until you
have carefully inspected and satisfactorily installed or operated the tool.
2. Make sure that all items in the parts list are included.
3. Inspect the parts carefully to make sure the tools and accessories were not damaged
while shipping.
WARNING! Do not operate the tool if any part is missing. Replace the missing part before operating.
Failure to do so could result in a malfunction and serious personal injury.

PARTS IDENTIFICATION

Contents:
• 5 in. Angle Grinder
• Side handle
• Wrench
• Spare carbon brushes (2 pieces)
ASSEMBLY
WARNING! Always be sure that the tool is switched off, unplugged and has stopped moving before
attempting to perform any adjustments.
Visit www.princessauto.com for more information
All manuals and user guides at all-guides.com
5 in. Angle Grinder V 2.5
13