Microphone Mute - Phonocar VM 041 Notice De Montage Et D'emploi

Other modes
Hangup
While talking, press the hangup key on your mobile phone or touch the hangup icon on the screen to end
the conversation.
Voice transfer
While talking, touch the 'Voice transfer' icon on the screen to transfer
audio from the unit to your mobile phone, and touch again to transfer
audio from your mobile phone to the unit.
Note: Some mobile phones will transfer audio from the unit to themselves once the incoming call is answe-
red.

Microphone mute

While talking, press the microphone mute icon on the screen to mute the microphone built in the unit. Under
this condition, the one talking over the telephone with you can not hear what you are saying. Touch the mute
icon again to resume microphone functionality.
Music mode
Pairing Before pairing, switch the work mode of the Bluetooth module to music mode. The
procedures of pairing under music mode is the same as the phone mode.
A2DP
A2DPis short forAdvancedAudio DistributionProfile. The mobile phones supporting this function can transmit
stereo audio, whereas the ones not supporting this function can transmit mono audio only.
After pairing, open the audio player of your mobile phone and set the transmit mode to Bluetooth. At this
time, the speakers of your mobile phone will close automatically.
About howto set the transmit modeof mobile phonesto Bluetooth,please refer to the user manual or help
document of the mobile phone in use or the audio player software because the audio players of different
mobile phones are different greatly.
AVRCP
AVRCP is short for Audio/Video Remote Control Profile. The mobile phones supporting this function can
control the playback of a Bluetooth audio player. After pairing, touch the corresponding icon to control cur-
rent playback, such as Play, Pause, Stop, Previous, Next.
General notes for bluetooth
1. For N7X, N9X, PHILIPS, Sony Ericssion, SAMSUNG mobile phones, during our test, after the mobile
phones appear connection successful, the unit still appear waiting for pairing. At this time you must find the
unit's Bluetooth module name "PHONOCAR" on the pairing list on your mobile phone and select connecting
in the submenu, then the unit will appear pair OK. Otherwise, there is no voice coming out when commu-
nicating, though the mobile phone has already displayed pair OK. Some mobile phones, such as PHILIPS,
when it playbacks A2DP, you must find the unit "PHONOCAR" in the phone's menu and reconnect (check
your mobile phone whether has the A2DP & AVRCP functions).
2. When pairing, some types of mobile phone hint that how to operate, for example, when you make a
phone call by the unit, if the mobile phone voice dosn't be transferred to the unit, no voice comes out. The
SAMSUNG mobile phone hints that voice should be transferred to Bluetooth device.
3. Depending on the mobile phone, if private mode is selected, when you make a phone call by the unit, or
receive, the voice would be transferred to the mobile phone. But sometime the Bluetooth maybe disconnect
till the communication ends, then connects your mobile phone to the unit automtically.
Some mobile phones maybe need pair again.
4. For mobile phone, the Bluetooth device name must be pr imary symbols or numbers. Otherwise, some
unpredictable issues may occur during the Bluetooth devices connecting and making phone call.
5. After paired OK, if no sound produced, please check whether the Bluetooth stereo audio on the phone
switched ON.
ATTENTION: our Bluetooth communication-protocol is based on the 2.0 Software. Before purchasing this
Product, please make sure that this Software is compatible with your mobile-phone.
48