Phonocar VM 041 Notice De Montage Et D'emploi page 47

Other modes
Function icons
The function icons of BT are outlined as below.
= Paring
= Setup
Menu = Menu
= Play / Pause
= Previous
Work modes of Bluetooth module
The bluetooth module has two work modes, which are phone mode and music mode. Touch the mode
switch icon to switch to its corresponding mode. Under phone mode, hand-free, call and other phone func-
tions are available. Under music mode, you can enjoy the music played back by your mobile phone through
the speakers in your car and you can control the playback.
Phone mode
Pairing: Use this function toestablish a connection betweenthe Bluetooth module and your mobile phone.
Switch the work mode of the Bluetooth module to phone mode, open the SETUP menu and select the Blue-
tooth sub-menu and then set the 'Bluetooth' option to 'On'.
Turn on the Bluetooth function of your mobile phone and start to search Bluetooth devices.
After the name of the Bluetooth module appears on the pairing list on your mobile phone, you should select
it. At this time, a pairing code is required. The Bluetooth module will exit pairing mode if there is no pairing
instruction from your mobile phone during the pairing time (90s) and 'Phone Pairing Fail' is displayed on the
screen.
Enter the pairing code (1234 by default) to initiate the pairing process. The paired mobile phone name will
display on the screen.
Browse call numbers
The Bluetooth module will download phone book and call records from your mobile phone after pairing.
Touch the [MENU] icon to display the Menu list. There are some options on the menu list, including missed
calls, received calls, dialed calls and phone book. When youpress one of them, the Bluetoothmodule will get
its corresponding information from your mobile phone.
Make an outgoing call
Browse through the Phone book or call records, touch the number you want to dial and then touch the dial
icon to make an outgoing call.
Touch the Dial Panel icon to open dial panel and then touch the numeric buttons to input phone numbers.
Touch the [C lear ] icon to clear the last digit. Touch the hangup icon to clear the entire numbers or end the
conversation. Touch the Ans icon to make an outgoing call.
Answer an incoming call
The Bluetooth module will switch to phone mode automatically when there is an incoming call and the inco-
ming call number will be displayed on the screen. If the 'Auto Answer' option of the 'Bluetooth' sub-menu
under the SETUP MENU is set to 'On', the unit will answer incoming calls automatically, otherwise you
should answer them manually.
The call duration will be displayed on the screen after the incoming call has been put through.
= Disconnect
= Voice transfer
= Answer / Dial
= Stop
= Phone mode
47
GB
= Dial panel
= Mute
= Hangup
= Next
= Music mode