General Safety Regulations - Holmatro HDC 8 Mode D'emploi

Pos. Type of mark
2.3

General safety regulations

• Use this equipment solely for the activities for which it was designed. If you are in doubt or
uncertain, always consult your Holmatro dealer.
• Replace illegible safety symbols, pictograms and information labels with identical ones, available
from your Holmatro dealer.
• Varnished, plastic and rubber parts are not resistant to corrosive acid or liquid. Except for electrical
parts, rinse parts that have come into contact with corrosive acid or liquid with a lot of water. Consult
your Holmatro dealer for a resistance list.
• Prevent dirt in and on the couplers.
• Protect equipment against sparks during welding or grinding activities.
• Avoid an unhealthy posture while working. It can result in physical complaints.
• Follow the inspection and maintenance instructions.
HDC (J)
All manuals and user guides at all-guides.com
Description
NOTE
Read the user manual before use.
WARNING
Wear safety shoes with good ankle support and toe
protection.
WARNING
Wear safety gloves.
WARNING
Wear safety clothing for the entire body with
reflective material.
WARNING
Wear safety goggles (or full face shield).
WARNING
Wear a helmet.
916.001.459_004
Part no.
Please contact
Holmatro.
EN
23