Safety Regulations - Holmatro HDC 8 Mode D'emploi

2

Safety regulations

2.1 Explanation of the symbols used in this manual
In this manual the symbols below are used to indicate possible dangers.
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
NOTICE
Is used to address practices not related to physical injury which, if not avoided, may result in
property damage.
NOTE
Emphasizes important information for optimal product use. This symbol is displayed in the
user manual with all regulations related to product use or maintenance.
Always adhere to these regulations and to the locally prevailing safety regulations, and proceed very
carefully.
Inform all people involved in the activities of the operation about these safety regulations.
2.2 Model plate and CE marking on the equipment
Refer to Fig. 1.
All pictograms attached to the equipment pertaining to safety and danger must be complied with and
remain clearly legible.
If the pictograms are illegible, have them replaced by a Holmatro Certified Technician.
WARNING
Not following these instructions can result in serious personal injury, fatal accident, damage
to the system or consequential loss.
/i
Pos. Type of mark
A
MAX.
12 bar
HDC (J)
All manuals and user guides at all-guides.com
Description
WARNING
Max. working pressure.
916.001.459_004
EN
Part no.
920.000.439.
21