Care And Cleaning; Drawer Dividers (Optional) - AGA MARVEL 60RDE Instructions D'installation, D'utilisation Et D'entretien

CARE AND CLEANING OF YOUR REFRIGERATED DRAWERS
Condenser
The condenser underneath the cabinet does not re-
quire frequent cleaning; however, satisfactory cooling de-
pends on adequate ventilation over this heat exchanger.
It is recommended to annually clean the condenser by
vacuuming and brushing. To access the condenser, the
unit must be pulled out from the installation, and the
lower machine compartment access cover removed.
Disconnect the power cord before cleaning the condenser.
Be sure that nothing obstructs the required air flow openings
in front of the cabinet. At least once or twice a year, brush or
vacuum lint and dirt from the front grille area (see page 4).
AVAILABLE OPTIONS FOR YOUR MARVEL DRAWER REFRIGERATOR
E-Z Stor Storage System
Removable stainless steel bins with clear plastic lids can be
moved to prep, cook, or serving areas as desired. Available for
60RDE and 80RDE upper and lower drawers.
P/N 42245441 for 60 upper or lower drawers
P/N 42245442 for 80 upper drawer
P/N 42245443 for 80 lower drawer
Figure 17
E-Z-Store Storage System
Plastic lids
Stainless steel bins
Stainless steel divider fits
on top of drawer sides.
Cabinet
The painted cabinet can be washed with either a mild soap and
water and thoroughly rinsed with clear water. NEVER use abra-
sive scouring cleaners.
Interior
Wash interior compartment with mild soap and water. Do NOT
use an abrasive cleaner, solvent, polish cleaner or undiluted
detergent.
Care of Unit
1. Avoid leaning on the drawer fronts, you may bend the
drawer slides or tip the unit.
2. Exercise caution when sweeping, vacuuming or mopping
near the front of the unit. Damage to the grille can occur.
3. Periodically clean the interior of the unit as needed.
4. Periodically check and/or clean the front grille as needed.
For further information on available options visit the AGA
MARVEL web site at www.agamarvel.com or contact your AGA
MARVEL dealer.
NOTE
When installing these options in the drawers the standard
drawer divider will have to be removed.
Drawer Dividers
Fully adjustable stainless steel drawer dividers allow for optimum
storage and organization of storage space.
P/N 42245444 for 60RDE upper drawer
P/N 42245445 for 60RDE lower drawer
P/N 42245446 for 80RDE upper drawer
P/N 42245447 for 80RDE lower drawer
Drawer Dividers
17
Stainless steel rods
Adjustment knob
Figure 18