Screen Adjustment - NEC MultiSync FE772 Mode D'emploi

Controls
–continued

Screen Adjustment

Making adjustments to the image size, position and operating parameters of
the monitor is quick and easy with the On Screen Display Control system. A
short example is quick and easy given below to familiarize you with the use
of the controls. The following section is an outline of the available adjustments
and selections you can make using the OSD.
NOTE: Allow the monitor to stabilize for at least 30 minutes before making image
adjustments.
To make adjustments in the On Screen Display, follow these steps:
1. Press the MENU (or OSD) Button, then the main menu of the OSD
appears.
2. To access a control, use the
becomes highlighted, press the SELECT (or SET) Button.
3. Use the
4. Accept the changes by pressing the SELECT (or SET) Button.
5. Exit the OSD by Pressing the MENU (or OSD) Button.
FE772FE992FEMANUAL122804.p65
or Buttons. When the icon you want
Buttons to adjust the item to the desired level.
7
7 12/28/04, 4:21 PM