Quick Start; Screen Position Adjustment - NEC LCD1515 Mode D'emploi

Quick Start

Attaching / Removing the Base
Install
1. Align the four hooks on the bottom of the monitor
with the corresponding slots on the bottom of the
base.
2. Slide the base in the direction of the arrows.
Remove
1. Depress the hook as indicated.
2. Remove the base in the direction of the arrows.

Screen Position Adjustment

In order to optimize the best viewing position, you can adjust the tilt of the monitor by
using both of your hands to hold the edges of the monitor as shown in the figure below.
The monitor can be adjusted to 30 degrees up or 5 degrees down as indicated by arrow
below.
15151715manual042502.p65
Hook position
4
4
Insure the lock is hooked completely.
Remove direction
4/25/03, 12:09 PM