Accucolor Control Function; Location Considerations; Cleaning Your Monitor; Unpacking - NEC MultiSync LCD1800 Mode D'emploi

®
1.10 AccuColor Control Function
The following color modes are available:
1. sRGB: sRGB mode dramatically improves the color
fidelity in the desktop environment by a single stan-
dard RGB color space. With this color supported
environment, the operator could easily and confi-
dently communicates color without further color man-
agement overhead in the most common situations.
We recommend you set the monitor to "Graphics"
mode. (Unadjustable.)
2. VIDEO: Suitable for motion picture. (Unadjustable.)
3. NATIVE: Original color presented by the LCD panel.
(Unadjustable.)
4. CUSTOM: The following items are adjustable.
COLOR TEMPERATURE: 5000K~9600K
COLOR CONTROL: This function enables inde-
pendent adjustment of 6 color (Red, Yellow, Green,
Cyan, Blue and Magenta) elements and color
saturation.
COLOR RESET: To restore to the color tempera-
ture and color control to the factory preset.
1.11

Location Considerations

When setting up and using the monitor, keep the following
in mind:
•
For optimum viewing, avoid placing the monitor against
a bright background or where sunlight or other light
sources may reflect on the display area of the monitor;
place the monitor just below eye level.
•
Avoid covering the slots or openings of the monitor.
Allow adequate ventilation around the monitor so the
heat from the monitor can properly dissipate. Avoid
putting the monitor into any enclosure that does not
have adequate ventilation.
•
Avoid exposing the monitor to rain, excessive mois-
ture, or dust, as this can cause a fire or shock hazard.
•
Avoid placing the monitor, or any other heavy object,
on the power cord. Damage to the power cord can
cause a fire or electrical shock.
•
When transporting the monitor, handle it with care.
•
Avoid giving any shock or scratch to the screen, as the
screen is fragile.
1.12

Cleaning Your Monitor

When clean the monitor, please follow these guidelines:
•
Always unplug the monitor before cleaning.
•
Wipe the screen and cabinet front and sides with a soft
cloth.
•
Do not spray directly on the screen as excess cleaner
may drip into the monitor causing a damage.
Do not use benzene, thinner or any volatile substances to
clean the unit as the finish may be permanently marked.
Never leave the monitor in contact with rubber or vinyl for
an extended time period.e the monitor in contact with
rubber or vinyl for an extended time period.
1.13

Unpacking

After you unpack the box you should have all of the items
indicated in Figure 1. Save the box and packing materials
in case you ship or transport the monitor.
1
- +
3
®
1. Multisync LCD1800
2. Power Cord
3. AC-Adapter
4. User's Guide (this booklet)
1.14

Tilt Base

The monitor comes with a tilt base. This enables you to
position the monitor to the best angle for maximum viewing
comfort.

Screen Position Adjustment

Adjust the tilt of the monitor by placing your hands at
opposite sides of the case. You can adjust the monitor as
shown in Figure 2.
CAUTION
Keep your fingers away from the pivot area of the tilt/swivel
base.
- 1-4 -
2
4
Figure 1
™
Monitor
Figure 2