Nokia 6265i Guide D'utilisation page 13

All manuals and user guides at all-guides.com
P h o n e a t a g l a n c e
■ Security functions
The security feature protects your device from unauthorized outgoing calls or denies
access to the stored information with a lock or security code. The lock code is a four-
digit number, while the security code is a five-digit number. By default, the security
feature uses the lock code (defaulted to the last four digits of your phone number),
instead of the security code to protect your phone.
You must enter your lock code to access the Security menu.
To access the Security menu, do the following:
1. In the standby mode, select Menu > Settings > Security.
2. Enter the lock code, and select OK. See "Security," p. 79 for more information.
Note: Depending on your wireless service provider, the preset lock code
may be 1234 or 0000 instead of the last four digits of your phone number.
If none of these work, contact your wireless service provider for more help.
To enter the lock code to restore the factory settings, do the following:
1. In the standby mode, select Menu > Settings > Restore factory sett.
2. Enter the lock code, and select OK.
Note: Depending on your wireless service provider, your phone may ask
for the security code (defaulted to 12345) instead of the lock code.
Note: If you enter the wrong lock code five times in succession, your
phone will not accept your current lock code for 5 minutes. This occurs
even if when you power down the phone between incorrect attempts.
■ Go to functions
The Go to menu allows you to change the function of the left selection key on
your phone so that your most frequently used functions can be quickly accessed
from the Go to menu in the standby mode.
Select options
1. In the standby mode, select Go to > Options > Select options.
2. Scroll to the options you want to add.
3. Select Mark to add an option or Unmark to remove an option.
4. Select Done when you have added all desired options.
5. Select Yes to save the changes.
6. In the standby mode, select Go to to display a list of the options that you
selected in step 3.
12