Dexter 2100AG2-230.5 Manuel D'instructions page 188

FR
ES
PT
IT
EL
Overload
PL The motor of your right angle grinding machine may be damaged when
overloaded. This results from excessive working pressure over a prolonged
UA period. Therefore you should not try to accelerate your working speed by
increasing pressure on your machine. The abrasive disks work more e ciently
if only slight pressure is exerted on the grinding machine, thus avoiding a drop
RO
in the grinding speed.
EN
8. CHECK THE DELIVERY PARTS
Carefully remove the tool from its packaging and check if the following parts
are complete:
1 x Angle grinder
1 x Side handle
1 x 230 mm grinding protective cover
1 x spanner
1 x External ange with thread
1 x Internal ange
9. MAINTENANCE / CLEANING /
LUBRICATION / STORAGE
Maintenance
Always be sure that the tool is switched o and unplugged before attempting to
perform inspection or maintenance.
If the carbon brushes need to be replaced, have this done by a quali ed repair
187