Dexter 2100AG2-230.5 Manuel D'instructions page 187

5. Press and hold the lock button (7) to lock the spindle and then tighten the
external ange (9) with the spanner (8).
B
(Thick)
Abrasive Disks
Ensure that the speed to which the machine is set is su cient for the accessories
chosen.
Use only abrasive disks with a diameter of up to 230mm!
Before mounting the disks remove the mains plug from the socket.
Note: Expect a "rain of sparks" when the disk comes into contact with metal.
While grinding, always maintain the correct angle between the disc and working
surface of 15-20°. This procedure ideal avoids overloads.
Switch ON/OFF
WARNING:To reduce the risk of injury, wear safety goggles or glasses with
side shields.
Turn on: push the lock-o knob and depress the main switch trigger.
Turn o : release the main switch trigger.
A
C
15~20°
186
A
B C
(Thin)
FR
ES
PT
IT
EL
PL
UA
RO
EN