Maintenance And Storage - Lanaform Moya Mode D'emploi

Masquer les pouces Voir aussi pour Moya:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
works properly and the scent is diffused. Exces-
sive use of essential oils could damage the device.
Make sure you pour water into the reservoir
first before adding the drops of essential oils.
Lanaform cannot be held liable in the event of
accidental damage resulting from any use con-
trary to the instructions given in these instruc-
tions for use.
Maintenance
and storage
When you are not using the diffuser, emp-
ty the water out of the reservoir. Do not tip
the water out of the reservoir from the ex-
haust vent side. If the water gets into the
exhaust vent, this might damage the de-
vice!
4
To prevent this from happening:
Use a container to pour wa-
ter into the reservoir.
Do not shake the diffuser.
Do not move the diffuser when
there is water in the reservoir.
If water accidentally enters the exhaust vent
5
, there is a safety device for removing wa-
ter from the base of the diffuser:
10
/ 84
Disconnect the power ca-
ble from the diffuser.
Empty the reservoir completely through
the opposite side to the exhaust vent.
Bend the diffuser towards one of the
drainage holes
Leave the diffuser in a dry
place for 24 hours.
Always unplug the device with
dry hands before cleaning it!
Maintenance
If the water contains too much calcium and
magnesium, it may deposit a white powder
in the device. If this foam is deposited on the
transducer 1
, it will prevent the device from
working properly.
We recommend:
01 Using distilled or demineral-
ised water each time it is used.
02 Cleaning the reservoir every 2 days and
cleaning the transducer every week.
03 Emptying and cleaning the device
(see explanations below) and
making sure that all its parts are
completely dry when it is not in use.
5
to empty the water.

Publicité

Table des Matières
loading

Table des Matières