Additional Information; Maintenance And Storage - Lanaform Fidji Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
EN
3 Press a third time to stop
4 Press a fourth time to
The device stops automatically when
there is no more water left in the re-
servoir
With dry hands, disconnect the USB
cable from the device and from your
computer or from the mains with its
adapter (not supplied).
Empty the remaining water in the dif-
fuser in the direction indicated by the
arrow (Fig. 6).
ADDITIONAL
INFORMATION
RELATING TO THE USE
OF ESSENTIAL OILS
Before using essential oils, please
check the harmful effects that use
of these products may have on your
health.
Always choose quality essential oils
that are pure, 100% natural and in-
tended for diffusion. Use them in
moderation and with care. Follow
the instructions and warnings stated
on the packaging of the essential oils,
in particular noting that:
Pregnant women, people with epi-
lepsy, asthmatics and people who
6
/ 60
E-IM-Fidji-001-2.0.indd 6
FR NL DE IT PL CS SK SL HR LT
the atmospheric light effect.
The diffuser will continue
to diffuse continuously.
switch the diffuser off.
report_p Even though there is a
safety device that stops the
transducer running, do not
leave the device connected
when you are not using it.
suffer from allergies, and those with
heart problems or serious illnesses
should not use essential oils.
Essential oils should be used only for
periods not exceeding 10 minutes in
a baby's room (under 3 years old) and
only when the baby is not actually in
the room.
Make sure that children and minors do
not play with or use the device.
Just a few drops (3 to 4 drops at most)
of essential oils are sufficient to ensure
that the device works properly and the
scent is diffused. Excessive use of es-
sential oils could damage the device.
Make sure you pour water into the re-
servoir first before adding the drops
of essential oils.
Lanaform cannot be held liable in the
event of accidental damage resulting
from any use contrary to the instruc-
tions given in these instructions for
use.
MAINTENANCE
AND STORAGE
If the water contains too much cal-
cium and magnesium, it may deposit
a "white powder" in the device. If this
foam is deposited on the transducer
(ceramic ring producing ultrasounds,
Fig. 1, point 5), this will prevent the
device from working properly.
Maintenance
We recommend:
1 Preferably using boiled and
cooled water for each use,
23/05/2018 11:45:27

Publicité

Table des Matières
loading

Table des Matières