Part Identification; Important Safety Information; Electrical Specifications - Danby DPAC12010H Guide D'utilisation Et Soins De Propriètaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Air Outlet
Signal Receptor
Castor
READ ALL SAFETY INFORMATION BEFORE USING
ELECTRICAL
SPECIFICATIONS
1) Check available power supply and resolve any wiring
problems BEFORE installation and operation of this unit.
All wiring must comply with local and national electrical
codes and be installed by a qualified electrician. If you have
any questions regarding the following instructions, contact a
qualified electrician.
2) This appliance draws 10.8 nameplate amps under Cooling
Mode and may be used in any properly wired, general
purpose 15 amp household grounded receptacle.
3) For your safety and protection, this unit is grounded through
the power cord plug when plugged into a matching wall
outlet. If you are not sure whether the wall outlets in your
home are properly grounded, please consult a qualified
electrician.
WARNING: Improper connection of the grounding plug can
result in risk of Fire, Electric Shock, and/or injury to Persons
associated with the appliance. Check with a qualified service
representative if in doubt that the appliance is properly grounded.
4) DO NOT USE PLUG ADAPTERS OR EXTENSION
CORDS WITH THIS UNIT. If it is necessary to use an
extension cord with this unit, use an approved "air
conditioner" extension cord only (available at most local
hardware stores).
5) To avoid the possibility of personal injury, always
disconnect the power supply to the unit before installing
and/or servicing.

PART IDENTIFICATION

Control Panel
Handle

IMPORTANT SAFETY INFORMATION

Air Intake
(Evaporator)
Air Intake Hose
Water Outlet Drain
Suggested Individual Branch Circuit
Nameplate Amps
10.8
*Based on copper wire at 105°C temperature rating.
Rated Volts
Amps
Wall Outlet
Fuse Size
Time Delay Fuse
(or Circuit Breaker)
CAUTION: Do not leave this unit
unattended in a space where people or
animals that cannot react to a failed unit
are located. A failed unit can cause
extreme overheating or death in such an
enclosed, unattended space
2
Air Outlet Hose
Power Supply Cord
TABLE 1
*AWG Wire Size
16
AWG- American Wire Gauge
TABLE 2
Receptacle and Fuse Types
125
15
15
Plug Type
.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Premiere dpac12010h

Table des Matières