Bunn Sure Immersion 220 Guide D'installation Et D'utilisation page 8

5. Push the hopper locking lever towards the back.
This locks the hopper in place and allows beans
to flow downward to the grinder.
6. Repeat Steps 3 and 4 for Right Hopper.
7. The hoppers are ready to be filled with beans.
8. Unlock and open the front door to reveal the
inside of the machine.
9. Find the Waste Bin in the lower right.
Remove the packing tape from Waste Bin and
Brew Funnel areas.
10. With the water supply line connected to the unit,
turn the water on & check for leaks.
11. Connect the unit to the power source (plug it in).
12. Turn the unit on by moving the power switch to
the "ON" position.
NOTE: The door must be closed to begin the
initialization sequence, it may take 60-90
seconds, and the machine will cycle in
preparation for operation.
INITIAL SETUP
5
7
8
10
12
8
Left Right
6
Lock
Lever
9
11