Bunn Sure Immersion 220 Guide D'installation Et D'utilisation page 29

DAILY
Rinse Tab
1. From the CARE AND CLEANING screen,
select the Rinse tab to prepare the equipment
for rinsing the Brew Funnel and Brew Box.
2. Press the Start button.
Follow the directions shown on the screen.
3. The CARE AND CLEANING screen will
show a progress bar with the message
"Please Wait - Rinsing".
NOTE: If for any reason the rinsing process
needs to be halted, press the Stop button.
The machine will pause. The user will then
need to press the reset button to reset the
machine. Insure the 64oz (2 liter) pitcher is
ready to capture any water that is dispensed
during the reset sequence.
WEEKLY
Clean Tab
1. From the SERVICE ACCESS screen, press the
Care and Cleaning button.
2. From the CARE AND CLEANING screen,
select the Clean tab to prepare the equipment
for cleaning of the brew system.
3. Press the Start button to begin.
NOTE: In the upper left corner of the screen
is a back arrow button that will allow the
user to return to the previous ADVANCED
ACCESS screen.
CARE AND CLEANING
1
3
2
29
2
1
3
continued >