Bunn Sure Immersion 220 Guide D'installation Et D'utilisation page 30

WEEKLY
Clean Tab
(continued)
4. Once the Start button has been pressed, a
message saying "Please do NOT open door
until prompted" will be displayed.
5. Press Continue button.
NOTE: Once a cleaning process has started, the
user can not exit without completing the cleaning
or performing a Stop/Reset.
6. Once the Continue button has been pressed,
the operator will be presented with a new
screen indicating that the cleaning process
has begun, and to "Please Wait... Removing
Loose Grounds".
7. During the Removing Loose Grounds step,
there is no operator interaction.
After the step has been completed, the operator
will be prompted with a new screen.
NOTE: If at any time during the cleaning cycle,
the process needs to be halted, press the
Stop button.
The machine will reset, and return to the
original start-up screen.
8. Press the Continue button to resume the
cleaning process.
CARE AND CLEANING
4
6
7
30
5
8
continued >