Barcode Printer Setup - Bunn Sure Immersion 220 Guide D'installation Et D'utilisation

NOTE: Printer hook up to the machine requires a db-9 cable.
1. If the machine is printer capable, and a printer
has been connected, the machine must be set
up to enable printing.
2. Navigate to the MACHINE SETTINGS
screen, and touch the BARCODE
PRINTER tab on the left.
3. Check the box next to Barcode
Printer Enabled in the upper left
of the screen.
4. Barcodes can be entered for each product
two ways - Automatic and Manually:
► Automatically
a. Press the Generate Barcode ID's in the
upper right corner.

BARCODE PRINTER SETUP

3
4
21
2
a
continued >