Zodiac AquaLink PDA PS4 Mode D'emploi page 19

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5.3.2 Programming the Variable Speed Pump
This section describes how to program a variable speed pump.
A variable speed pump can be programmed to run at any one of its eight (8) speeds. If the variable speed pump is used
for pool filtration, then it will be powered from the FILTER PUMP relay. Therefore to program the variable speed
pump you must first set a program time for the FILTER PUMP, then you need to program the pump speeds to turn
on/off during the FILTER PUMP cycle. If you do not program any speeds to run during the filtration cycle, then by
default the variable speed pump will run at the POOL speed setting during its filtration cycle.
Example:
1. The total length of the filtration cycle is to be from 8am to 5pm, therefore, program the FILTER PUMP
to turn on at 8am and to turn off at 5pm.
2. To run the variable speed pump at the SPEED3 setting from 8am to 1pm, highlight and select VSP SPD1
PGM, then highlight and select SPEED3, program it to turn on at 8am and off at 1pm.
3. To run the variable speed pump at the SPEED4 setting from 1pm to 5pm, highlight and VSP SPD1
PGM, then highlight and select SPEED4, program it to turn on at 1pm and off at 5pm.
FILTER PUMP
SPEED3
SPEED4
AquaLink
PDA | Installation and Operation Manual
®
PROGRAM
FILTER PUMP
SPA
VSP1 SPD PGM
POOL HEAT
SPA HEAT
SOLAR HEAT
AUX 1
AUX 2
ON
OFF
8AM
5PM
Total duration of filtration cycle
8AM
1PM
Pump runs at the SPEED3 setting
1PM
5PM
Pump runs at the SPEED4 setting
PROGRAM
FILTER PUMP
SPA
VSP1 SPD PGM
POOL HEAT
SPA HEAT
SOLAR HEAT
AUX 1
AUX 2
PROGRAM
FILTER PUMP
SPA
VSP1 SPD PGM
POOL HEAT
SPA HEAT
SOLAR HEAT
AUX 1
AUX 2
PROGRAM SPEEDS
POOL
SPA
SPEED3
SPEED4
POOL HEAT
SPA HEAT
SOLAR HEAT
SPPED8
PROGRAM SPEEDS
POOL
SPA
SPEED3
SPEED4
POOL HEAT
SPA HEAT
SOLAR HEAT
SPPED8
ENGLISH
FILTER PUMP
NEW PROGRAM
ON
8:00 AM
OFF
5:00 PM
ALL DAYS
Use ARROW KEYS
to set value.
Press SELECT
.
to continue
SPEED3
NEW PROGRAM
ON
8:00 AM
OFF
1:00 PM
ALL DAYS
Use ARROW KEYS
to set value.
Press SELECT
to continue.
DESCRIPTION
SPEED4
NEW PROGRAM
ON
1:00 PM
OFF
5:00 PM
ALL DAYS
Use ARROW KEYS
to set value.
Press SELECT
to continue.
Page 19

Publicité

Table des Matières
loading

Table des Matières