Zodiac AquaLink PDA PS4 Mode D'emploi page 11

3.6 Solar Heat
The SOLAR HEAT selection controls solar heating. A solar heating system and optional solar sensor are required for
SOLAR HEAT selection to operate and must be part of the normal circulation system.
3.6.1 To use Solar Heat
Highlight SOLAR HEAT and press SELECT. Use the SELECT button to turn SOLAR HEAT on or off.
For solar heating to take place, the SOLAR HEAT (in EQUIPMENT ON/OFF) must be enabled, also the filter pump
must be on. Solar temperature must be at least 5°F (-15°C) above the water temperature and the water must be cooler
than the thermostat setting.
AIR
POOL MODE
POOL HEATER
SPA MODE
SPA HEATER
MENU
EQUIPMENT ON/OFF
NOTE
If no Solar Sensor is installed, EXTRA AUX will appear as a menu item.
AquaLink PDA | Installation and Operation Manual
®
FRI 10:30 PM
POOL
OFF
OFF
OFF
OFF
EQUIPMENT
OFF
FILTER PUMP
OFF
SPA
OFF
POOL HEAT
OFF
SPA HEAT
OFF
SOLAR HEAT
OFF
AUX 1
OFF
AUX 2
OFF
AUX 3
MORE
EQUIPMENT
ON
FILTER PUMP
OFF
SPA
OFF
POOL HEAT
OFF
SPA HEAT
OFF
AUX 1
OFF
AUX 2
OFF
AUX 3
OFF
EXTRA AUX
MORE
ENGLISH
EQUIPMENT
ON
FILTER PUMP
OFF
SPA
OFF
POOL HEAT
OFF
SPA HEAT
ENA
SOLAR HEAT
OFF
AUX 1
OFF
AUX 2
AUX 3
MORE
Page 11