Zodiac AquaLink PDA PS4 Mode D'emploi page 13

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3.9 Set Light Colors
NOTE
This equipment may not be part of your system. Please check with your installer.
The SET COLOR menu is used to set the color of a color light and then turn the light on.
NOTE
Prior to setting the color of the light, the light must be assigned and controlled by an auxiliary (for example, AUX 1). See
"Using System Setup" to assign the light to an auxiliary control. Please note that the auxiliary control can be custom
labeled.
3.9.1 To use Set Colors
Highlight EQUIPMENT ON/OFF and press SELECT. Highlight the auxiliary assigned to the color light and press
SELECT. A list of available colors will be displayed. The most recently selected color will be highlighted. Use the
UP/DOWN arrow keys to highlight the desired color and press SELECT.
NOTE
If you select POOL LIGHT or SPA LIGHT from the EQUIPMENT ON/OFF menu and the light is already ON, pressing
SELECT will display the message "LIGHT WILL TURN OFF IN 5 SECONDS. IF YOU WANT TO CHANGE THE COLOR
PRESS SELECT NOW". If you press SELECT, the SET COLOR menu will open and allow you to select a different color. If
a different color is chosen, the light will reset to Alpine White, rotate to the selected color, and then automatically lock on to
that color. During the color rotation, the message "PLEASE WAIT...CYCLING TO CHOSEN COLOR" will be displayed.
When a pool or spa light is turned ON manually, by the PDA Handheld Remote panel, or by a program, the last used color
will automatically be chosen unless you press SELECT to change the color.
If you press the BACK key when in the EQUIPMENT ON/OFF menu, the light will turn on the last selected color. If
the SELECT key or the BACK key is not pressed, and if it has been 15 seconds since the UP/DOWN keys have been
pressed, then the most recently selected color will be selected again.
Do not activate this feature unless you are certain that color lights are installed on your system
AquaLink
PDA | Installation and Operation Manual
®
EQUIPMENT
FILTER PUMP
ON
SPA
OFF
POOL HEAT
OFF
SPA HEAT
OFF
SOLAR HEAT
OFF
POOL LIGHT
OFF
AUX 2
OFF
AUX 3
OFF
MORE
EQUIPMENT
FILTER PUMP
ON
SPA
OFF
POOL HEAT
OFF
SPA HEAT
OFF
SOLAR HEAT
OFF
POOL LIGHT
ON
AUX 2
OFF
AUX 3
OFF
MORE
Important Information
SET COLOR
ALPINE WHITE
SKY BLUE
COBALT BLUE
CARIBBEAN BLU
SPRING GREEN
EMERALD GREEN
EMERALD ROSE
MAGENTA
MORE
LIGHT
ALPINE WHITE
WILL TURN OFF
SKY BLUE
IN 5 SECONDS. IF
COBALT BLUE
CARIBBEAN BLU
YOU WANT TO
SPRING GREEN
CHANGE THE
EMERALD GREEN
EMERALD ROSE
COLOR PRESS
MAGENTA
SELECT NOW.
ENGLISH
FILTER PUMP
PLEASE
SPA
WAIT . . .
POOL HEAT
SPA HEAT
CYCLING TO
SOLAR HEAT
CHOSEN COLOR
POOL LIGHT
AUX 2
AUX 3
SET COLOR
CHOSEN COLOR
MORE
Page 13
EQUIPMENT
ON
OFF
OFF
OFF
OFF
ON
OFF
OFF
MORE
PLEASE
WAIT . . .
CYCLING TO

Publicité

Table des Matières
loading

Table des Matières