General Technical Data - Burkert 3005 Mode D'emploi

TechnicalData
7.5. General technical Data
7.5.1. mechanical Data
Dimensions:
Weight:
Body material:
Actuating angle:
Duty cycle:
Manual emergency actuation:
Working modes:
Type 3005
See chapter "7.5.2. Dimensions"
2 5 - 75 Nm; 3.1 kg
100 - 300 Nm; 5.6 kg
600 - 1 000 Nm; 20 kg
B ody made of aluminium
Cover made of polyamide
(optionally aluminium)
Axles and screws made of
stainless steel
Gears made of galvanized steel
90° (optional 180°, 270°) ± 5°
5 0 % at maximum torque
(optionally 80 %)
w ith open-end wrench on faces of
the axle (up to 75 Nm);
by handwheel (from 100 Nm)
O pen/Close Mode or Three points
Mode (see "Fig. 18" and "Fig. 19")
7.5.2. Dimensions
motor 25 - 75 nm
Fig. 7: Dimensions Type 3005 at torque 25 - 75 Nm
english
13