2. Introduction
2.3 Package Contents
Item
UPS System
Owner's Manual
IEC to IEC Jumpers
USB Cable
RS232 Cable
Note:
1. Inspect the UPS system for damage after unpacking it. If there is any damage or anything is missing,
immediately contact Tripp Lite Tech Support.
2. If the UPS needs to be returned, carefully repack the UPS and all of the accessories using the original packing
material that came with the unit. It is recommended to retain all original packing materials.
Model-Specific Accessories (Optional)*
Model
External Battery Pack (LIMIT 1)
External Battery Pack (NO LIMIT)
* Visit the specification page for your UPS system at www.tripplite.com for detailed extended runtime data and
additional accessory options.
EXTERNAL BATTERY CONFIGURATION NOTE
If external battery packs are to be used with this UPS, install them following the mounting/installation
documentation included with each battery pack. External battery pack installation requires the UPS be configured
via Tripp Lite's EXTERNAL BATTERY CONFIGURATION software, downloadable from
http://www.tripplite.com/bpconfig (for all external runtime configurations)
This UPS is factory programmed with discharge curves and charging profiles for two basic external battery pack
configurations accessible using the UPS front panel LCD interface. Additional battery pack options using larger or
multiple external battery packs are also supported, but require configuration using Tripp Lite's EXTERNAL BATTERY
CONFIGURATION software and a serial port connection to the UPS. See 5.7 External Battery Type Selection
Mode to determine which method applies to your external battery pack configuration.
18-09-252-93358B.indb 6
SUINT1000XLCD
SUINT2000XLCD /
SUINT3000XLCD
SUINT1000XLCD
1 Pc.
1 Pc.
2 Pc.
1 Pc.
1 Pc.
SUINT1000XLCD
BP24V15RT2U or
BP24V28-2U
BP24V70RT3U
6
SUINT2000XLCD / SUINT3000XLCD
1 Pc.
1 Pc.
3 Pc.
1 Pc.
1 Pc.
SUINT2000XLCD
SUINT3000XLCD
BP48V24-2U or
BP72V15-2U or
BP24V27-2US
BP48V60RT3U
BP72V18-2US
BP72V28RT3U
1/9/2019 2:19:26 PM