Tripp-Lite SmartOnline SUINT1000XLCD Manuel D'utilisation page 15

5. Operation Modes
5.6 Setup Mode
Press the scrolling button
Note: only qualified service personnel may perform setup actions. In setup mode, the following items can be adjusted:
1. Inverter voltage
2. Inverter frequency
3. Bypass range
4. Economy mode
5. Alarm disable
6. Overload alarm
For setup procedures, refer to the following:
1. Press the scrolling button
2. Press the scrolling button
3. Press the confirmation button
4. You can skip to the next setup item by pressing the cancel button
5. In setup mode, press the scrolling button
original display.
6. In setup mode, if no button is pressed for more than 2 minutes, the LCD will exit from the setup
mode and return to the original display.
This UPS supports a variety of advanced configuration options that can be accessed via the front
panel LCD screen. Configuration and information items include Inverter Voltage, Inverter Frequency,
Bypass Range, Economy Mode, Alarm Setup and Overload Alarm Setup. Some settings cannot be
changed in certain operation modes. Refer to the table below for details:
Setup Item
Inverter Voltage
Inverter Frequency
Bypass Range
Economy Mode
Alarm Disable
Overload Alarm
Note: Only qualified service personnel may perform setup actions.
18-09-252-93358B.indb 15
for more than 3 seconds to enter the setup menu.
for more than 3 seconds to enter into the setup mode.
for 0.1 second to change the parameter.
for 0.1 second to confirm your parameter.
Standby Mode On-line Mode
Yes
Yes
Yes
Yes
Yes
Yes
for more than 3 seconds. The LCD will go to the
Bypass Mode
No Yes
No Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
15
for 0.1 second.
Battery Mode
No
No
Yes
Yes
Yes
Yes
1/9/2019 2:19:29 PM