Tripp-Lite SmartOnline SUINT1000XLCD Manuel D'utilisation page 16

5. Operation Modes
Setup Mode Flow Chart
T>0.1S
T>0.1S
T>0.1S
T>0.1S
T>0.1S
Inverter Voltage Setup
OUTPUT VOLTAGE refers to the nominal output voltage of the UPS. This value is most commonly set
to match the prevailing country or region-specific nominal voltage.
Note: Certain voltage settings will cause automatic de-rating. See specifications on unit label for de-rating info.
Inverter Frequency Setup
OUTPUT FREQUENCY refers to the cycles per second (Hz) of UPS output power. To configure your
UPS to convert frequency when in Battery Mode (default 50Hz) from 50-to-60Hz or 60-to-50Hz, set
the OUTPUT FREQUENCY to the desired setting. The frequency will return to the source frequency
when source is applied.
18-09-252-93358B.indb 16
Original Display
T>3 seconds
Inverter Voltage Setup
T=0.1S T>0.1S
Inverter Frequency Setup
T=0.1S T>0.1S
Bypass Range Setup
T=0.1S T>0.1S
Economy Mode Setup
T=0.1S T>0.1S
Alarm Setup
T=0.1S T>0.1S
Overload Alarm Setup
T=0.1S T>0.1S
16
T>3 seconds
T>0.1S
T>3 seconds
T>0.1S
T>3 seconds
T>0.1S
T>3 seconds
T>0.1S
T>3 seconds
T>0.1S
T>3 seconds
T>0.1S
1/9/2019 2:19:30 PM