brennenstuhl Solar Power SH 4000 Notice D'utilisation page 8

Mounting instructions
8
All manuals and user guides at all-guides.com
1.) Drill two holes (6 mm diameter) in the
2.) Remove the two screws in the base of
3.) Secure the rear panel of the housing to
4.) Now stick your house number or letters to
5.) The numbers or letters must now be posi-
6.) With the house number or letters in
wall, 120 mm apart.
the unit and separate the two parts of the
housing.
the wall with the screws supplied.
the window in the housing (first, detach
the edges from the chosen numbers/let-
ters on all four sides).
tioned in accordance with the markings
on the pull-off foil.
position, place the foil in the centre of the
window, taking care to ensure that it lies
flat.