Using The Phone; Answering Incoming Calls; Volume And Tone Receiving - Geemarc AMPLIPOWER60+ Mode D'emploi

1 - ANSWERING INCOMING CALL
Without headset:
- When an incoming call is received, the phone will ring, to answer the call
lift the handset and speak.
- On completion of the call, carefully replace the handset in the cradle to
release the line.
With headset (option):
- When an incoming call is received, and if you wish to answer the call with
the headset, press the SPKR button and speak.
- On completion of the call, press the SPKR button again to release the
line.
In handsfree mode:
- When an incoming call is received, the phone will ring, to answer the call
press the SPKR button.
- On completion of the call, press the SPKR button to release the line.
2 - VOLUME AND TONE RECEIVING ADJUSTMENT
You can increase the volume and adjust the receiving tone according to
your own hearing requirements. The button +60dB allows extra-receiving
and tone functions to be activated or not during the conversation. When
the function is activated, the red light of extra receiving and tone function
located near the button +60dB is lit. Adjust the TONE and VOLUME buttons
to remove.
Note:
When the switch located behind the phone is ON, the extra-receiving and tone func-
tions are automatically activated each time you use the phone. When the switch is
switched OFF, you will need to activate the function by pressing the button +60dB.
Tone and volume adjustment 30dB to 60dB is only activated when the button
ON.

USING THE PHONE

9