Bras Digital B-Frozen 6.1 Carnet D'instructions page 21

the recover. (see figure 14)(see figure 15).
figure 14
figure 15
7. 4. 6 ASSEMBLY
1 Slide the drip tray into place..
2 Lubricate the tap piston, the hexagonal joint and the mixer
at the points indicated in figure 16 (B-Frozen 6) or figure 17 (B-
Frozen 10), using only the grease that came with the machine
or other grease for use with food.
3 Reassemble the tap on the container in reverse order
compared to that shown in figure 16 and figure 17.
4 Replace the container gasket.
N.B. the rim with the greater diameter must be rested on the
rear wall (see figure 18).
5 Reassemble the hexagonal joint and then the mixer (see
21
figure 16
figure 17
figure 18