Publicité
Les langues disponibles
Les langues disponibles
B - f r o z e n 6 & 1 0 D i g i t a l
The keys have the following functions:
Pilot light A
On the right bowl: if it is on, it indicates that
the machine is in Standby mode; if it is off, it
indicates that the machine is working; if it fla-
shes, it indicates that the right bowl only is
off.
On the left bowl: if it is off, it indicates that
the bowl is working; if it flashes it indicates
that the bowl is off.
Standby key B
On the right bowl: if it is pressed for two
seconds, it allows turning on and off the
whole machine; if it is pressed quickly while
the machine is working, it allows turning on
and off a single bowl (on machines with mul-
tiple bowls only).
If it is pressed twice quickly: it allows turning
on and off the cover lights.
On the left bowl: if it is pressed quickly while
the machine is working, it allows turning on
and off a single bowl.
Product
Pre-
If it is pressed quickly, it allows increasing/
servation
Key
decreasing density. If it is pressed one
(C)
second while the machine is running in the
Granita making mode, it allows switching to
the Product Preservation mode. If it is pres-
sed one second while the machine is run-
ning in the Product Preservation mode, it
allows switching to the Washing mode.
Granita Making
If it is pressed quickly, it allows decreasing
key (D)
density. If it is pressed one second while the
machine is running in the Product Preserva-
tion mode, it allows switching to the Granita
Making mode.
If it is pressed one second while the machine
is running in the Granita Making mode, it
allows resetting possible alarms.
The display shows the following icons, too:
S o l e n o i d v a l v e
It shows the condition of the cooling sole-
icon (E)
noid valve.
Icon off: solenoid valve closed
Icon flashing: delay timer on
Icon on: solenoid valve open
Product Preserva-
If it is on, it shows that the machine is in
tion Icon (F)
the Product Preservation mode.
Granita making
If it is on, it shows that the machine is in
Icon (G)
the Granita Making mode.
Density bar (H)
It shows the set density value and the alar-
ms.
HOW TO START THE DISPENSER
Turn the main switch to position I. Pilot light (A) will be on
showing that the dispenser is ready to work.
Keep key (B) pressed until the dispenser starts.
Select the operation mode and the desired product density by
means of keys (C) or (D).
The smart display (optional) shows the following icons, too:
S o l e n o i d v a l v e
It shows the condition of the cooling sole-
icon (E)
noid valve.
Icon off: solenoid valve closed
Icon flashing: delay timer on
Icon on: solenoid valve open
Product Preserva-
If it is on, it shows that the machine is in
tion Icon (F)
the Product Preservation mode.
Granita making
If it is on, it shows that the machine is in
Icon (G)
the Granita Making mode.
Density bar (H)
It shows the set density value and the alar-
ms.
Current time (L)
Displays the current time and/or product
temperature.
°C/°F scale icon
temperature scale set (°C or °F).
(M)
Timer icon (N)
when this symbol is lit, the timer is opera-
ting.
TIMER
DAY/NIGHT TIMER
This control board has a clock module which is used to
automatically switch from day mode to night mode and
vice versa at preset times.
N.B. On machines with multiple tanks, the timer will only be
present on the master display board and its settings will apply
to all tanks.
When the machine is in Standby, the current time will be
displayed with two flashing points separating the second and
third digit to indicate the seconds.
The current time and the mode switching times can only be set
when the machine is in Standby mode using the following keys:
Setting of current time and temperature scale (°C / °F)Key B +
Key C
Setting of mode switching time intervalsKey B + Key D
Timer ON/OFF Key D pressed for 5 seconds
SETTING OF CURRENT TIME
Press keys B and C simultaneously to enter the current time
setting mode. Press keys C and D to make the individual
settings and press key B to conform and move on to the next
selection. The following must be set in this order:
1 European or American way of displaying the current time.
The number 24 or 12 will be displayed and the second two
figures will flash.
2 Setting of current time. The first two figures will flash as well
as the third or fourth figure if the American A/P clock is
selected.
3 Setting of minutes. The second two figures will flash.
SETTING OF MODE SWITCHING TIME INTERVALS
Press keys B and D simultaneously to enter the switching time
interval setting mode. The setting will always start from 00:00
and the first time with the day mode, indicated by a lit G icon.
Press keys C and D to increase or decrease the time shown on
the display by intervals of 15 minutes and press key B to modify
the operating mode from day to night and vice versa. To adjust
the intervals, you must select whether the machine should be in
night or day mode at 00:00 by pressing key B and then press
16
Publicité
