Maintenance; Returning To The Standard Factory Settings - Atlantic TATOU DIGITAL Notice D'utilisation Et D'installation

Depending on your installation, the temperature you read may be different to the one displayed on
your device. In that case, you can calibrate the temperature displayed.
Hold the following keys down
simultaneously:
- Programming (C),
- Power on (E).
E.g. The temperature displayed on your device is 20°C.
The temperature displayed on your thermometer is 19°C -> Choose a calibration value of -1°C.
Confirm your choice by pressing the Programming key (C). Your device will heat until the room temperatu-
re reaches 20°C.
To maintain your device's performance, you must dust it approximately twice a year.
Never use abrasive products or solvents.
R
ETURNING TO THE STANDARD FACTORY SETTINGS
It is possible de return to the standard settings for your device.
Hold the following keys down
simultaneously
- Aeration (B),
- Settings (C),
- Scroll (E),
until everything is displayed on the
screen (see page 33 for the different
displays).
C
ALIBRATE THE TEMPERATURE
C
M
AINTENANCE
C
B
46
E
With the + (D) or - (F) keys,
choose your calibration value
(between -2°C and 2°C).
E
The device switches to Comfort
mode at 19°C. The
is at 15.5°C. The energy saving and
programmed functions are deacti-
vated.
mode