Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
It is strongly advised not to mount the device above an alti-
tude of 1000 m (risk of malfunction). It is forbidden to mount
a vertical device horizontally and vice versa.
Installation and Maintenance
The device being heavy, we recommend that you install it with
The device is delivered with its wall bracket. The choice of screws and
plugs, however, depends on the nature of your wall. It is up to you to
validate that you will use the appropriate screws and dowels according
to the weight of the device.
PREPARING THE INSTALLATION OF THE DEVICE
Installation guidelines
- This device was designed to be installed in residential premises. In any
other case, please call your distributor.
- Installation must comply with the standards currently enforced in the
country of use.
- The device must be supplied with 230V single-phase 50Hz.
- In damp areas such as bathrooms and kitchens, you must install the
connection box at least 25cm above the floor.
Keep the device away from any draughts that may interfere
with its operation (e.g.: under a centrally controlled fan, etc...).
Do not install the devise under a fixed socket.
Comply with the minimum distances from any furniture units when
positioning the device.
Do not install a shelf above vertical devices.
two people.
Volume 1 No electrical device
Volume 2 Class II IPX24
25
EN
Publicité
Table des Matières
