Midea MRT18S2AWW Manuel D'utilisation page 25

PROBLEM POSSIBLE CAUSE
The room temperature is
The
hotter than normal.
compressor
turns on and
A large amount of food
off frequently.
was recently added.
The door is not closed
completely or was opened
too often.
The refrigerator has been
disconnected for a period
of time.
The temperature control
was not set correctly.
Refrigerator needs
Refrigerator
cleaning.
has an odor
Improperly wrapped food
is giving off an odor.
ERROR CODES
Fault Code
LED1 indicator and LED2 indicator
LED1 indicator and LED3 indicator
LED1 indicator and LED4 indicator
SOLUTION
This is normal.
Allow time for the recently
added food to cool, and
then check again.
Check the door gasket and
food distribution to make
sure the door will close
completely.
Allow 4 hours for the
refrigerator to cool
completely before adding
food.
Set the temperature
control to the correct
setting.
Clean the refrigerator. See,
"Cleaning."
Wrap food tightly or seal
before storing it in the
refrigerator.
Fault Description
Refrigerator temperature sensor
circuit
Freezer defrost sensor
Ambient temperature sensor
25