Midea MRT18S2AWW Manuel D'utilisation page 17

14.
Mount the ice maker assembly on to
the two (2) screws installed in
step # 11.
Tighten the screws.
Be sure that the water inlet tube is
securely inside the fill cup.
15.
Adjust the leveling bracket to ensure
the ice maker assembly is totally level.
The ice maker will be level when the
gap between the freezer wall and the
ice maker assembly is the same at the
top and bottom.
Once completely level, tighten the
leveling bracket screw.
16.
Reinstall the freezer shelf below the
ice maker assembly.
Set the ice container below the ice
maker assembly.
17.
Connect the wiring harness to the
water valve as shown.
Ensure the connection is secure.
18.
Install the mounting box on the
connecting terminal of the water
valve and the wiring harness. After
the cover is closed, fix the box cover
and the mounting box firmly with
screws.
Screw(5)
Fill Tube
Top
(1) Ice Maker
Bottom
(6)Screw
(7)Bracket
(2) Ice
Container
(10) Water valve
(13) Mounting box
(12) Box cover
17