Operation Requirements; Location Requirements - Midea MRT18S2AWW Manuel D'utilisation

Masquer les pouces Voir aussi pour MRT18S2AWW:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATION REQUIREMENTS

LOCATION REQUIREMENTS

WARNING
Explosion and Fire Hazard
Keep flammable materials and vapors, such as gasoline, away from
appliance.
Failure to do so, can result in death, explosion or fire.
This refrigerator is designed to be freestanding only, and should not be
recessed or built-in.
Place your refrigerator on a floor that is level and strong enough to
support the refrigerator when it is fully loaded.
Place your refrigerator where there is access to the required electrical
connection. See "Electrical Requirements."
Locate the refrigerator away from direct sunlight and sources of heat,
such as a stove, heater or radiator.
NOTES:
– Direct sunlight may affect the acrylic coating and heat sources may
increase electrical consumption.
– Extremely cold temperatures may also prevent the refrigerator from
performing properly.
Avoid locating the refrigerator in areas with high humidity.
Adequate air circulation is required for efficient operation. Maintain the
recommended clearance to ensure adequate air circulation.
RECOMMENDED CLEARANCE
NOTE: If you place the refrigerator next to a fixed wall, allow sufficient
space on the hinge-side for the door to swing open.
6
a
a
a
a
a
3" (7.6 cm)
Clearance at the
top, back and
both sides of
the refrigerator

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mrt18s2abbMrt18s2ass

Table des Matières