Before Use; Waiting Period; Cleaning - Midea MRT18S2AWW Manuel D'utilisation

19.
Locate the factory punched holes at
the lower right panel on the rear of the
refrigerator.
20.
Push up the white plastic ring at the bottom
of the valve until it doesn't move, then insert
the water pipe into it and loosen the plastic
ring.
21.
Secure the plastic water tubing to the rear
of the refrigerator cabinet with the two (2)
plastic clamps provided.
** NOTE **
Clean the area of the back of the unit where
you will be placing the plastic clamp with
household cleaner, ammonia or alcohol to
provide a clean surface for the adhesive to
adhere to.

BEFORE USE

WAITING PERIOD

•
Before plugging the refrigerator into a grounded 3-prong electrical
outlet, allow it to stand upright for approximately 2 hours.
NOTE: This reduces the possibility of a malfunction in the cooling
system from improper handling during transportation.

CLEANING

1.
Wash the refrigerator interior using a soft cloth dampened with a
baking soda solution (2 tablespoons baking soda mixed with 1 quart of
warm water).
2.
Using a soft cloth, thoroughly dry all surfaces.
18
(3) Plastic Water
Supply Tubing
(9) Plastic Clamp