Tivoli Audio Music System Home Generation 2 Mode D'emploi page 22

RDS Data
In FM Mode, push the Settings/Select knob, then turn it until "RDS Data" appears onscreen. Push the
Settings/Select knob. Select a setting by turning the Settings/Select knob, then push the
Settings/Select knob to confirm.
AM Scan Strength
In AM Mode, push the Settings/Select knob, then turn it until "AM Scan Strength" appears onscreen.
Push the Settings/Select knob. Select the desired scan strength by turning the Settings/Select knob,
then push the Settings/Select knob to confirm.
AM Tuning Step
In AM Mode, push the Settings/Select knob, then turn it until "AM Tuning Step" appears onscreen.
Push the Settings/Select knob. Select the desired tuning step for your region by turning the
Settings/Select knob, then push the Settings/Select knob to confirm.
Firmware Version
Push the Settings/Select knob, then turn it until "FW Version" appears onscreen. Push the
Settings/Select knob to view the current firmware version.
Display Contrast Settings
Push the Settings/Select knob, then turn it until "Contrast" appears onscreen. Push the
Settings/Select knob. Turn the Settings/Select knob until the desired Contrast is achieved, then press
the Settings/Select knob.
Factory Reset
A Factory Reset will restore all features on Music System Home to their default settings. Push the
Settings/Select knob, then turn it until "Factory Reset" appears onscreen. Push the Settings/Select
knob. Turn the Settings/Select knob until the confirmation appears, then press the Settings/Select
knob.
Auto Power Off
This allows your Music System Home to shut itself off if it is idle for a period of time. Push the
Settings/Select knob, then turn it until "Auto Power Off" appears onscreen. Push the Settings/Select
knob. Turn the Settings/Select knob until the confirmation appears, then press the Settings/Select
knob. "Enable" will set the model to turn off after it is idle for a period of time. "Disable" will turn this
feature off and your unit will always stay on until you manually power it off.
Bass Cut
This allows you to lower the level of bass frequencies emitted from your Music System Home. Push
the Settings/Select knob, then turn it until "Bass Cut" appears onscreen. Push the Settings/Select
21
English