Tivoli Audio Music System Home Generation 2 Mode D'emploi page 21

Settings
Note: All of these functions are available through the remote using the option on the remote as
well.
Clock Set
Manual Time Set: Push the Settings/Action knob, then turn it until "Manual Time Set" appears
onscreen.
Push the Settings/Select knob. Select the hour by turning the Settings/Select knob and press it to
confirm. Do this again to select the minute, meridian, day, month, and year. To confirm, select YES
then press the Settings/Select knob.
Auto Time Enable: To allow your Music System Home to update the time via WiFi, FM, or DAB, set
to "Enable". Selecting "Disable" will require you to manually set the time.
Alarm Set
Push the Settings/Select knob, then turn it until "Alarm Set" appears onscreen. Push the
Settings/Select knob. Select the hour by turning the Settings/Select knob and press it to confirm. Do
this again to select the minute, and whether you would like the alarm to be active. To confirm, select
YES then press the Settings/Select knob.
Sleep Time Set
Push the Settings/Select knob, then turn it until "Sleep Time Set" appears onscreen. Push the
Settings/Select knob. Select the hour by turning the Settings/Select knob and press it to confirm. Do
this again to select the minute. To confirm, select YES then press the Settings/Select knob.
Network Set (for Ethernet users)
This is used to connect your Music System Home to an ethernet connection. Push the Settings/Select
knob, then turn it until Network Set appears onscreen. Push the Settings/Select knob. Turn the
Settings/Select knob to "Ethernet" if using the wired Ethernet port in the back of the Music System
Home. If you are using WiFi, ensure that this is set to WiFi. Both cannot be used at the same time.
FM Scan Strength
In FM Mode, push the Settings/Select knob, then turn it until "FM Scan Strength" appears onscreen.
Push the Settings/Select knob. Select the desired scan strength by turning the Settings/Select knob,
then push the Settings/Select knob to confirm.
FM Tuning Step
In FM Mode, push the Settings/Select knob, then turn it until "FM Tuning Step" appears onscreen.
Push the Settings/Select knob. Select the desired tuning step for your region by turning the
Settings/Select knob, then push the Settings/Select knob to confirm.
20
English