Tivoli Audio Music System Home Generation 2 Mode D'emploi page 20

Settings Knob
Please go to the settings section for detailed operation.
Bezel Control
Manual Tune Up: To manually tune up to a higher frequency station, rotate the bezel to the right.
Manual Tune Down: To manually tune down to a lower frequency station, rotate the bezel to the
left.
Rescan: To rescan for all DAB stations, quickly double press the bezel.
Add a station to your preset stations: To add a station to your saved preset stations, press the
bezel once. Once added, you may access it using the remote. It is also possible to add presets by
using your remote. Simply hold the number preset you would like to use and wait for on-screen
confirmation. To delete the preset, either hold down the button on the remote or long press on the
bezel control.
Settings Knob
Please go to the settings section for detailed operation.
To connect your Music System Home to a Model SUB for a 2.1 audio experience. Pressing the SUB
button automatically enables a bass cut function, which may be disabled separately through the
Settings Menu.
1. Connect the receiver to power using the supplied USB cable to a 5V power supply (not
included).
2. Check the switch on the receiver is set to "Rx".
3. Plug one end of the included 3.5mm Adapter into the receiver, the other end into the Line Input
of your Model SUB.
1. NOTE: The Model SUB must be set to Auxiliary Input mode.
4. Short press the "SUB" button on the back of your Music System Home.
5. Short press the button on the receiver. The light will start blinking rapidly, indicating pairing
mode.
6. Once connected, the light on the receiver will flash in an intermittent pulse.
The volume of your Model SUB must be set independently from the Music System Home. If either
the Receiver or Music System Home is turned off, the pairing process must be repeated.
Please note: The BT Sub Receiver is packaged with the Model SUB.
English
DAB/DAB+/DMB Mode
SUB OUT
19